Wireless Speaker Box

With the wireless speaker, you can get creative by integrating speakers into furniture, cabinetry and other commonplace items. The speaker connects wirelessly to any Bluetooth enabled device.

Cutting the Dados

Cut the two grooves in the inside face of the stock that will become the sides, top, and bottom. Insert a ¼-in. dia. straight bit in the router table and set the bit height to ¼-in. Then position the fence ¼-in. away from the bit. Use feather boards to help keep the stock fl at on the table and tight against the fence. Rout the two 1/4-in.-wide x 1/8-in.-deep grooves in the inside face of the stock.

Cutting the Dados

Cutting the Sides

Miter cut both ends of the side, top, and bottom pieces. Use a sacrificial fence to help support the stock and set up a stop block to ensure that each piece is cut 3-in. long. Label the four pieces sequentially to keep them in order for assembly. This will keep the grain aligned around each mitered corner.

Cutting the Sides
Prev1 of 3Next

Leave a Reply

Your email address will not be published. Required fields are marked *